Kenmore 24032\24036 Top Load Washer "600 lid" Questions

Ad

...600 top loader washer fills with water but does not engage in the wash cycle unless you open the lid and close it roughly, then you will hear a low audible click from the lid area I think .Then the ...

Ad

...lid switch but that has not solved the problem. I I have kenmore washer series 600 model 11027642600 that is spins and rinses for about 6 seconds and then stops for 5-7 minutes. I've changed ...

Ad

I have a kenmore 600 washer model # 110.29622801 and it will only fill up with water and do nothing else. What can i do? You have a bad lid switch. Replace it with this part and you will be good to go

Question about Kenmore Washing Machines

1 Answer

600 series, it pumps water in but will not do anything else. Is there a reset button on the motor or pump? Hello there and welcome to fixya If your washer doesn't seem to work at all, check these:

Question about Kenmore Washing Machines

1 Answer

...loader 600 series filled with water and then quit doing anything. no agitation, no spin, no rinse, nothing. what could be wrong? not the breaker, not hoses, not plug. Push down on lid or lid

...600 won't spin. agitaion is fine. pump is fine. Water fill is fine. Agitation is fine, and stops when lid is opened. Pumps water out, but won't spin. Pump stops when lid is opened. Check/ ...

...600 Auto Load Sensing HE Washer it fills water but won't wash and then drain and spins what could it be? If the lid switch is defective or lid not completely closed this would be expected. Fill but ...

Question about Kenmore Washing Machines

2 Answers

lid switch/lock ..sensor is part of control bd haven't seen control bd indicate switch problem and it not being the switch I have the same problem. A friend did too. My friend told me that this washer

...600 does not come on at all, the power light is on but nothing happens, no matter which cycle I choose. A few years back I replaced the capacitor. The lid switch may be bad. Try bypassing the lid ...

my kenmore washing machine fills up and agitates but does not spin Lid must be closed for spin to start. If the lid is closed and still no spin, the sensor (switch) for the lid may be bad. If you can ...

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

3,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...