Panasonic Lumix DMC-ZR1 / DMC-ZX1 Digital Camera "len assembly" Questions

ERROR REMOVE CAP LENS I Have a Panasonic DMC-FZ8, and i getting an error REMOVE CAP LENS AND THEN PRESS ENTER....The problem is that There is not CAP LENS On the camera.,,,And because of this error I ...

...happened. Either they rain shorted out a component, or part of the cpu output (that controls the lens assembly). The whizzing sound is the lens assembly drive motor trying to drive the lens gears. ...

...and signals from the onboard processor. If any dust, sand, lint, etc., gets inside the lens assembly, it can jam the ring, not allowing it to focus. Your best shot to remedy this (short ...

DMC-SZ02 Lens disassembly The lens has something jamming it upon turning the camera on and it won't open. Camera is out of warranty and repair cost at a shop exceeds the camera cost, so I want

...off and then on again every time i turn it on I dropped my camera and now when I turn it on the lens goes back and forth and the display reads "Please turn camera off and then on again" Hi, I too ...

How can I clean the INSIDE of a Panasonic Lumix DMC-LZ7 lens? There's dust on the inside of my lens. How can I clean this? Unscrew the entire lens assembly from the body. The inner lens cannot get ...

FZ5 zoom lens carriage stuck The lens carriage on my FZ5 is stuck or jammed in the fully extended position. When I turn it on it thinks that the lens cover is on and tells me to remove it. I think it ...

Tz10 lens cover sticking Lens cover is sticking on opening and closing. My TZ10 problem was the opposite, the cover wouldn't open. I just resorted to surgery with needle-nose pliers and a carefully ...

Scratched lens I have a small scratch on the lens. Where can I get this fixed and how much will it cost? I'd say Panasonic could repair it for you. I would guess that the cost would probably approach ...

the lense is stuck open. it clicks and attempts to close the lense but no luck. it was not dropped and was working fine just minutes before this problem. If you got some gunge in the mechanism it ...