Question about 3Com Baseline Computers & Internet
...null-modem cable Once the cable is connected, reboot the switch. Type a Ctrl/C until you enter the failsafe mode. This will be denoted with the prompt: ?CFE>? At the prompt execute the following ...
...with a null-modem cable In windows, hyperterminal , To enter into Password Recovery Mode: login: recover password: recover Turn the power off (hard reset) within 30seconds Re-enter the password
Question about 3Com Baseline Computers & Internet
...as ip address and factory defaults can be set through the Console Interface (CLI). You will need a null-modem cable to access this and a terminal client (Windows Hyperterminal works). Hope that ...
...Null-Modem Cable , hook up the Console port of the switch to an available COM port on a computer (cable must be able to provide serial port communication between 2 computers). Set up a Hyperterminal ...
...serial port, you could also try another serial port or another computer. I use Hyperterminal for many applications. You may also need to use a null modem serial cable (i dont know what you are
...null modem serial cable). The CLI interface isn't very intuitive but if you can connect this way you might be able to reset it to factory defaults or reload the latest firmware. If not then get a new ...
10 questions posted
Usually answered in minutes!
2 Questions
12 Questions
12 Questions