Question about 3Com Baseline Computers & Internet
terminal emulator program is set to VT-100 management using compatible, 38400 baud rate, no parity, 8 data bits and Console connection one stop bit. Use the included cable, or be sure that the pin-out
Question about Allied Telesyn Computers & Internet
...now be able to login with the default username and password( UN: manager PWD: friend) To connect a terminal to the device Console port, perform the following: 1. Connect a cable to the terminal ...
Question about Allied Telesyn Computers & Internet
...now be able to login with the default username and password( UN: manager PWD: friend) To connect a terminal to the device Console port, perform the following: 1. Connect a cable to the terminal ...
...Connecting to an IBM or Compatible Device To connect an IBM PC or compatible device, running the VT terminal emulation, to an Enterasys Networks module Console port (Figure 3-20), proceed as follows: ...
how to reset Networking Switch linksys sr2024 1. Connect to the console port using terminal emulation parameters (typically 38400, 8, 0, 1, None) 2. Reboot switch (Remove power) 3. Hold down Ctrl U ...
...my linksys switch srw224g4. can anyone help me in this regard [1] Connect to the console port using terminal emulation parameters (typically 38400, 8, 0, 1, None) [2] Reboot switch (Remove power) [3] ...
Question about 3Com Baseline Computers & Internet
...and i cant access a catalyst 2960 24-port 10/10 You can only reset password this way: 1. Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) to the console port of the ...
Question about 3Com Baseline Computers & Internet
S. I managed to recover the password using the same procedure on a Cisco Catalyst WS-C2900 Attach a terminal or PC with terminal emulation to the console port of the switch. Use the following terminal
...can also use the Graphical User Interface (GUI). Using the CLI to configure a switch 1. Connect a terminal or PC to the Terminal Port (ASYN0). Using the supplied RS-232 DB9 serial straight-through ...
...terminal emulator such as Hyperterm, telnet,VT100, etc to the serial port. Configure the emilator to19200 Baud 8 plus none. Switch the 4924 on and login using the user "recover" (without quotes) and ...
10 questions posted
Usually answered in minutes!
2 Questions
12 Questions
12 Questions