reset to its default settings via the WEB INTERFACE - Web Interface - Device >Configuration >Initialize To change the Default User "ADMIN" password it is necessary to use the Console connection
...Baseline Switch 2924-SFP Plus i need to manage it but i forget the administrator password how can i reset this switch to manufacture configuration or how to reset the password First,"There is usually ...
...reset to factory default, and everything went fine, IP set to factory value, but Admin user, with blank password does not work to acces to web console Try 'admin' (all lower case as the ...
Question about 3Com Baseline Computers & Internet
...reset by removing power, waiting 10 seconds, and then re-applying power. 3) Once the switch has rebooted, enter a new password for the "admin" user account. 4) Enter enable to leave password recovery ...
...system control initialize Resets to factory defaults. Please login in Switch usign Default ip then in last menu they give one option reset switch as factory default setting please click on
...reset to default well i have a allited telesyn 8024 switch i don, no the password i tried the default ones but use less then i try to reset the switch with reset botton] but the setting is not go to ...
...reset to the factory default. Dlink describes the reset for the "B" version but not the A1 version which I have. Thanks Jeff Log in to the switch as an administrative user (using the login command). ...
Question about Motorola Computers & Internet
reset this model AP to factory default? Thank you and appreciate all the reply. Note the AP has no console port or reset switch, if you need to factory default the switch you must send the MAC address
...reset. This will return the router to default and you can set it up a again for your network. Good luck On the Linksys routers the configuration IP address is 192.168.1.1 and the default Username = ...
...default IP address. Is there a way to recover from this? when you reset the switch it turns it back to the settings it had when it came out of the box. Try the default factory username, password and ...
13 questions posted
Usually answered in minutes!
2 Questions
12 Questions