Sony BRAVIA KDL46V5500 46 in TV "set normal screen" Questions

...screen. Image on 'normal' setting isn't using full height of screen. It's cut off 1 inch strip along the top & the bottom. How do I get the image to make full use of height of tv screen? Thanks. What ...

...I really need help to get them back to normal settings, please help! l would contact (listed here as a Sony) customer service to see if a reset is available that will set all back to

...Normal picture mode then it generates sharper picture quality but same time smaller screen appears (square screen) only wide mode give me full 40 inch appearance and I loose the resolution very much ...

...to menus (Press Home) Then select "Settings" and select "Screen Settings". Set Wide Mode to "full", Auto Wide to "off" , Auto Display Area to "off", Display Area to "normal". I hope this works for ...

set at wide mode and normal is not highlighted to be able to change it Try pressing HOME, Then go to SETTINGS From the list, select SCREEN There are now several options that may be causing the picture

...set on look to see if you see a very faint image on the screen.Almost all these sets use a back light system for brightness---an inverter of some type to power the lights---either the back light is ...

...normal picture size setting I bought the sony kdl 40v300 and connected to time warner scientific atlanta hd dvr box with component video cables. I set up the box to allow all available broadcast ...

screen is cut off, either partially or competely. Can someone tell me what I am doing wrong? Thanks for the help. I had that same problem, I finally figured out that on my COX cable remote there is a

...It had been set to "zoom" / "wide" mode. I reset to "normal" and now channels look fine again. how did you adjust the cable settings? I have the problem just with my HD channels, I have comcast ...

...normal and then go black again sometimes it will be fine for awhile These sets use for the most part two boards--each drives the screen on one side---also possible as suggested here the problem is ...