Sony KLV-32EX330 Series BRAVIA Direct Multisystem LED TV "tv replace amp switch" Questions

...tv it got switched off. When i turned resetting it, i got red light blinking 5 times in a row and it goes on. I"ve tried using different Please help sme 5 blinks indicates a panel issue. check all ...

...replace it. Ur power board the problem,replaced it. Problem with my Sony KDL-46XBR LCD TV I purchased this TV in May 08 and now when you turn it on the right hand side of the screen runs down the ...

tv came up with same problem, KDL-48w 600b and Now same thing happens to KDL-55w 800b , standy led (red light) blinking 3 (three) times on both models. no switching on. please help HI if the red light

TV GOES TO STAND BY MODE.CHECKED POWER SUPPLY BOARD ,PICTURE BOARD, & MOTHER BOARD IT SEEMS OK.THERE IS NO COMPONENT BURNING SIGN.WHAT WILL BE THE PROBLEM & WHICH COMPONENTS NEED TO CHECH & REPLACE.PL

TV XBR9 won't turn on and shows 6 blinking lights on the led indicatior. What circuit board should I replace first? These blinks [flashes] are fault indication (Error Codes). From the number of blinks

...TV, I have replaced the TCon Board and the LED Panel. Any suggestions? These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an ...

...TV worked for about an hour, and then died again. Same 'standby' 6 blinking light error code appears. Granted, this inverter board may also be bad, but based on that screenshot, could something else ...

...TV Red Light Blinks 6 times always on failure Hi! I tried to replace my inverter board, with a used board I found online. Not sure if the replacement has an error too, but will try to exchange it. On ...

...replace the circuit board. Is that true and if so which part would that exactly be? These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, ...

TV; The picture is black, red indicator light blinks 7 times every three seconds. Have already replace the power board. How do I resolve this problem? ERROR CODE: 7- red flashes main board overheating