Question about Kodak ESP Office Equipment & Supplies
...Error: "Printhead Failure" (105-3802) - Kodak support.en.kodak.com/.../error%3A-printhead-failure-(105-3802) KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...
Question about Kodak ESP Office Equipment & Supplies
...message paper jam., You need to replace the printhead you may also call kodak 1 800 421 6699, and have your free printhead replacement. Most of the time overriding the error message solve the ...
Question about Kodak ESP Office Equipment & Supplies
Error message, printhead missing or not installed or has come loose. The printhead is in place, I removed the cartriges and removed the printhead then replaced them with the same results help! I am ...
Question about Kodak ESP Office Equipment & Supplies
Error - printhead nor installed correctly or has come loose. Install printhead and ink cartridges. If already installed, remove ink cartridges and printhead, then reinstall..... I've done this ...
Question about Kodak ESP Office Equipment & Supplies
printhead not installed., Its normal if you have E error that you will have 2 flashing red light check color ink or black. Now try to reseat the printhead of the printer, YOu need to removed first the
Question about Kodak ESP Office Equipment & Supplies
...Error: "Printhead is missing, not installed correctly, or has come loose" (105-3513) Please use the following link to help you trouble-shoot and fix this error: Error Printhead is missing not ...
error code 3802 It is related to the printhead of the printer.Either the printhead is not detected by the printer or it has gone bad. Kindly take the printhead out and reseat it a couple of ...
Question about Kodak ESP Office Equipment & Supplies
error? printhead missing?, now put the printhead back. 6. Closing of the printer access door brings up error message ?missing cartridge.? 7. Insert both the ink cartridges into the printhead. 8. Close
...error. Make a print.OR Check the printhead carriage area: Debris and Obstructions: Remove any paper, tape or other obstructions from the printhead carriage area. Gently move the printhead carriage ...
...error: Open the printer access door. Disconnect the power adapter from the printer. Gently hold both sides of the carriage, located immediately behind the printhead, and make sure the carriage moves ...
53 questions posted
Usually answered in minutes!
1,049 Questions
732 Questions
131 Questions
112 Questions
99 Questions