Brother SE350 Mechanical Sewing Machine "feed dog button" Questions

Feed Dog problem Did you ever get a reply to your problem? I too am having that same problem with my feed dog not moving the material and sewing in one place. What did you do to fix the problem? Here ...

...feed dog isnt connecting with material Hi, if you remove the accessory box and look carefully behind it, you'll see a feed dog drop sliding button. Just slide the button over to the other position, ...

not feeding material Cloth will not move through feed dogs. Make sure that you did not disengage the feed dogs by accident. You should have some type of button that allows you to control the feed dogs

...button on the upper left that controls the feed dogs dropping. Depends on your machine make/model. A lot of machines have a switch that actually drops the feed dogs. Other machines have an accessory, ...

feed dog is stuck in the down position. Embroiders fine, but can't sew.I have tried the manual button, it moves back and forth, but doesn't move the feed dogs. Have cleaned the area. What next? if the

Feed Dog The feed dog can be lowered with the drop-feed lever for sewing on buttons etc. Shift the drop-feed lever to the right to lower the feed dog. Shift the lever to the left to raise the feed dog

...feed dog so that I can sew? I haven't had any luck pushing the button on the screen. There is always a special button that raises or lowers the feed dog. Yours is probably in the down position where ...

Feed dog button is stuck in the in position won't come out to raise feed dogs? "FEED DOG BUTTON" ISN'T QUITE CLEAR. HOWEVER, THE FEED DOG IS CONTROLLED BY THE STITCH LENGTH. IF THE STITCH LENGTH IS ...

...feed dog I have a Viking 6690 that belonged to my mother. I cannot find the instruction manual and can't get the feed dogs to come up. She was quite the quilter so I suspect that they were lowered so ...

feed dog button not working The button to raise and lower the feed dogs will not depress down to the right in order to lower the feed dogs. Anyone have any idea what the problem may be, and how to fix