Brother PE770 Computerized Sewing Machine "thread wrap around needle plate" Questions

...thread off to the left and wrap it around the thumb screw on the left and just above the needle. Wrap it only 2 or 3 times and hold the end of the thread. With bobbin in place and the face plate slid ...

...finally breaking, this is the cause. Big culprits is the thread "notch" on the thread spool or the thread wraps around the spool pin. Also, look for burrs that may be snagging the

...thread is catching. Use a fine piece of fabric, like an old pair of hosiery, wrap it around your finger and run your finger around in the bobbin area and the needle plate. If there is a burr or nick, ...

...thread is being pulled in and wrapping around the bobbin. I have cleaned the bobbin carrier and there is no sign of foriegn material under the sole plate. The wrap around occurs with or without ...

...thread wrapped around the upper thread. Open the loop and find the free end of the bobbin thread. Voila! Now you can sew. Raise the presser foot. and close the slide plate over the ...

...around the thread spindle.  This would cause extra tension that might not be readily apparent. Good luck Sometimes the problem can be the thread itself. I bought some cotton thread that would ...

...thread wrapped around the bobbin housing--sewing along just great and then everything comes to a screeching halt. I'm not sure why that happens, but I'm getting pretty good at taking the bobbin ...

thread wrapping around hook under needle plate then jamming I bought a CE-100 about 3 weeks ago and it was doing GREAT. Now the top thread is wrapping aroung the hook on the left side under the needle

...up underneath and I dad to cut it free now the needle wont raise There may still be some thread wrapped around the bobbin mechanism, or in the needle plate, which will stop the needle moving

...thread wrapped around the needle, remove the thread from the needle and then correctly thread the needle. If the needle falls, you can use the thread to carefully pull the needle back up by holding ...