bobbin case. Thread it in case. Hold the thread and carefully let go of the case only holding bobbin thread. The case should NOT move. Quickly let your hand drop 2-3 inches to let the bobbin case free
...bobbin,, hold it by suspending it by the thread,, **** it once or twice,, if the tension is correct, the thread will unwind by about an inch or two if the tension is too tight, it does not unwind at ...
Question about Sewing Machines
...hold the bobbin mechanism in place so I can get to the tension screw? the tension screw for the bobbin thread is on the side of the bobbin carrier that bit that you put the full bobbin in to clip it ...
...bobbin case, hold it only by the thread. If the bobbin and bobbin case fall, the tension is too loose. If this is the case, turn the bobbin tension screw 1/4 turn until the bobbin and bobbin case do ...
Question about Sewing Machines
...of the fabric. If the bobbin thread is really tight and holding the upper thread down, then the bobbin case needs a tension adjustment. Search the internet for instructions to adjust bobbin
Question about Husqvarna Sewing Machines
...adjust the bobbin tension first? Sewing machine tension is a delicate tug of war between the bobbin holding onto the bottom thread and the top tension pulling it to the centre of the fabric. The 8:51 ...
Question about White Sewing Sewing Machines
...Adjust the bobbin tension. The tension on top is set to three and the bobbin tension should be equal to this amount. 3. Replace needle. 4. Check the top tension with tension foot down to see if the ...
...take out the bottom bobbin and adjust this till it will not quite hold it's own weight when you hold the cotton and let the weight of the bobbin fall gently on it. adjust the top tension to
Question about Sewing Machines
...free bobbin tension is by the small screw that holds the flat spring under which you pull the thread after fitting in the bobbin back in the carrier ( seldom need to adjust bobbin thread
Question about Brother Sewing Machines
...hold its own weight, but still able to release thread when you pull gently downwards on the bobbin case. If it isn't doing this then take your little screw driver and adjust the ...
90 questions posted
Usually answered in minutes!
435 Questions
168 Questions
165 Questions
144 Questions