Question about Datamax Office Equipment & Supplies
...position fault" how do I fix that? Position fault or Out of stock when the printer is loaded with paper stock can usually be solved by calibrating the printer. Press & hold the FEED button. Let ...
...position fault error. Calibrated machine says faulty sensor. have you monitoerd the values which are given by your sensor? Have you checked that you have selected the right type of detection before ...
...fault" i don't no what that is The error is indicating that it cannot calibrate the media. Try holding in the feed key for approx 10 seconds and see if it will calibrate. Experiment with the position ...
position fault Position Fault is common on Datamax printers with the LCD Display. Press "FEED" one time and this should clear it out. If not, "PRESS AND HOLD FEED" for about 5 seconds and release. ...
...position fault! what should i do? If you use ms-access you must have installed the windows driver, therefore you must enable the cutter in the printer properties. Position fault is that it does not ...
Position fault error How do i fix The Datamax I4308 returns a position fault error if it cannot sense the label gap where its supposed to be, or if the sensor returns a value outside the permitted ...
Question about Datamax Office Equipment & Supplies
...position fault. could any one please help? Check to see if you are using the right settings for your paper stock - could be a mark or a gap - this is in your printer settings. Always check your paper ...
Question about Datamax Office Equipment & Supplies
...position/clear view of labels by sensor doesn't seem to be the issue, an easier way to deal with settings issues might be to Restore to Factory Defaults (see below). Datamax E-Class Auto Media ...
...Fault". Can you please tell me what that means and how to fix it? It means that the printer did not get a good calibration on the label. First make sure the label sensor is in the proper position. ...
fault... if so: 1. check paper sensor position, sometimes just 1/8" one way or the other will make a difference. 2. calibrate the printer to the stock you have loaded - calibration is EASY, just press
72 questions posted
Usually answered in minutes!
102 Questions
67 Questions
37 Questions
34 Questions
25 Questions