...stem AND crown (the metal filling the hub is the broken end of stem). In case if the crown still in tact, let me know by asking questions and I'll guide you through all the process HOW TO. Rate me, ...
...crown is loose on the stem. Get the stem completely out of watch and while holding in vice or pair of pliers screw the crown back on tight. Do not overscrew it, as the stem may brake. Even better ...
...stem out of the crown you may be able to get someone to solder the stem back together. I do that reguarly with stems that are vintage, and I don't want have the time to remake the whole stem. Let me ...
...crown/stem of CASIO EF-321 In which position should the stem/crown be for removal? What point exacty should be pushed or unscrewed to remove the stem to be able to remove the movement? I can send a ...
...After you get the stem out with the crown on it you then will need to hold the stem and rotate the crown counter clockwise to remove the crown. This should work for almost all
...easy dont force it once u done that try un screw crown from stem then file down stem were the crown goes on not alot or it will be to small super glue crown back on when it fits be carefull good ...
...stem out of the crown at the 12 o'clock position of an Elgin stem-set pocket watch. Rotate the stem clockwise to move the hands to the correct hour and minute. Depress the stem and wind the crown to ...
...the same factory crown or just one that looks nice but not the official crown , but crown , if stem is not broking around 15 - 20 dollars to replace, crown and stem around 30 4-5 dollars to
...crown. Install the crown and stem in the watch and check to see if everything still works(setting, time adjustment, etc.) Might pay to have a watchmaker do this, this is more technical than it
37 questions posted
Usually answered in minutes!
260 Questions
254 Questions
95 Questions
77 Questions