Tally 6312 Matrix Printer "check ribbon" Questions

...Check Ribbon Error" after printing 2 or 3 pages. Sometime it prints 7-8 pages and sometime it prints 2-3lines only and shows check ribbon error. Carriage shaft is dry. tried with another encoder ...

check ribbon' hardware alarm... carriage moves ok, 2 new ribbons ...that came from other machines,,,, ribbon drive seems fine, could it be encoder strip??? please help! The check ribbon message on the

...check ribbon " error is comming on my tally 2280+ serialprinter tally genicom 2280+serial printer The ribbon I had installed (code 061627) which says it is the correct one is in fact not. the drive ...

showing Ribbon Fault hiclean the ribbon then if still same error chang the ribbon first replace ribbon then clean ribbon sensor at left side if not check cable to motor of ribbon works properly

ribbon is installed??? Check this!! Take out the ribbon and run a print without the ribbon.While printer is printing check if the small pin of the ribbonholder is spinning. When yes there is a problem

sx5 ribbon error Use an appropriate Ribbon. Check that the slits on the ribbon detection is not full of dirt. check that your ribbon motor parameters are correctly set.

...Check that the ribbon core is fitted corectly. - Check that you selected thermal printing in the driver. - Check tha the size of the label is correct and that the interval between label is correctly ...

...ur advise thanks steve Dolphin intl. there are few things.. may be your ribbon hub damage... your ribbon motor not working properly.. check ribbon motor connection...and finaly L/C..CMX..CFX

...ribbon). Check ribbons by touching sticky side of label to ribbon (it will transfer ink to label on print side). 2. Could also be faulty printhead, Logic board or Power supply. These will require an ...

ribbon properly Check support.epson.com for documentation & additional information. With this type of printer that is usually in heavy use in office environments, on-site service is recommended. Check