Question about Optoma Office Equipment & Supplies
needs to be replaced. This is the excerpt from the manual on how to reset the lamp life timer. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu
Question about Sharp Office Equipment & Supplies
...and lamp light are green for replaced bad lamp, power and lamp light are green for about 1 min then turn red ,but the lamp does not come on at all Yes you need to replace lamp,so you buy a new
Question about Sony Office Equipment & Supplies
...lamp. replaced lamp and installed new lamp. need to reset lamp Installed new lamp and need to reset lamp Press RESET, <, >, ENTER keys on remote within 5 seconds to reset lamp timer. hi go to ...
i need to replace the projector bulb hi, for replacing the lamp do the fallowing. 1 turn off the projector and disconnect the AC power . allow the projector to cool for at-least 45 minutes. 2. remove ...
...but more often than not this problem is traced to the lamp needing to be replaced. I can tell you now dont wast money on a lamp or a lamp drive ballast unit, the fault if a defective mother
Question about InFocus Office Equipment & Supplies
...Replaced lamp, new lamp stopped working in about 5 hours, got another new lamp and it does not light at all. Still blinking 3 red blinks(saying the bulb is bad) make sure the colorwheel is spinning. ...
Question about Optoma Office Equipment & Supplies
...lamp housing needs to be replaced.It can be replaced and replacement lamp is also available. -------------------- Buying original lamp is always advisable.But there is compatible lamp also ...
replaced bulb but still getting "lamp will fail soon replace" warning When you replace the lamp, you need to reset the lamp counter as well. The procedure for this should be in the owner's manual. ...
...replaced the lamp? If so did you reset the lamp timer? If no to number 1 then you need to replace the lamp they are only good for 1000-1500 hrs then need to be replaced before the blow out all ...
...lamp needs replacing? Yes. The lamp is timed and the replacement indicator signals when the lamp is near end of life. If the lamp fails catastrophically it makes a mess... best to replace before that ...
18 questions posted
Usually answered in minutes!
54 Questions
43 Questions
29 Questions
26 Questions
22 Questions