...sound out of it. with triggers or pads? Some of the Alesis products have a setup and data memory backed up by a battery. It is POSSIBLE that your battery expired and took the sound memory with it. ...
...sound was a bit higher(not by mutch) but had a lot of stactic. i have no idea what ist is. What are you recording from? If using a condenser mic and you fail to turn on the Phantom power, symptoms ...
...and they had assigned various samples to keys or key ranges. This can be done using Reason fairly easily. The setup would be in the sampler you use however and not the keyboard. Hope this helps.
Question about Kurzweil Music
...sound from any Setup..... OS version 2.21... latest I think ... thanks. See above. No sound at all from Setups. I have no problem with rest modes...but in setups no sound and no description left on ...
...setup which sets the rate and delay at which the reduction occurs. Use of compression causes distortion of the waveform usually to prevent clipping. It is often used if vocalists go from normal level ...
...sound of my original setup... Most needles were manufactured by the same company, so it really doesn't make too much difference. What is the "after market" name that you are questioning? If both ...
sound card. You can use the LOW CUT to reduce hum if you have noisy system. Describing balancing the levels is more than I can do here. There are many good videos about mixer setup on YouTube.com. You
Question about Soundcraft Music
...sound out of the house speaker was to mix to the mono ''C' mix. Monitor seems unaffected. Any ideas? The first thing I recommend is to make sure that no mute buttons are ...
sound doesn't stop. How can I fix this? I don't have any of that gear, but check that an option like "note on/off" is turned on in the MIDI setup menu on the Juno-D. Also check in Logic that it's midi
...sound I want. If you don't want distortion, get rid of the overdrive pedal... Twangy USUALLY comes from the GUITAR and NOT the amp... test it on a different amp to decide... Buzzing CAN be caused by ...
124 questions posted
Usually answered in minutes!
191 Questions
85 Questions
69 Questions
32 Questions