trimline treadmill repair 7600.1 no power The treadmill stopped and the upper board was on. I shut it off and tried to restart it and it appears to be dead. No lights on control board or upper board. ...
Red key is inserted, mains are switched on. Lit up ok. All started working fine then went indoors, came back out 5 mins later and the whole thing was dead. Turned everything off and left it for 30 ...
Question about Life Fitness Exercise & Fitness
My Life Fitness Display is completely dead, worked fine the last time it was used 2 weeks ago Adjust for 1/8" and clean the sensor switch. Remember the main boar controller motor control the function ...
Question about Exercise & Fitness
Nordic T20 Works for 25 minutes then stop working.Circuit board led comes on, but no consol power and no function at all. I do not have circuit diagram to fault find. Thank you! When the circuit board
Question about Exercise & Fitness
Getting a dead sensor reading on pacemaster pro plus treadmill We bought a used pacemaster pro plus that we set up and it runs for 5 seconds stops with the error message dead sensor. What is the ...
after been on the machine 30/40 mins walking & running the machine cuts dead. You switch it off then back on, nothing you should check the drive motor, check if it is overheating and that is the ...
Reebok vista treadmill Consul won't turn on This type of treadmills seem to have high probability of failure if you use the emergency cutoff switch instead of the power switch at the bottom. My guess ...
Question about Nordic Track Exercise & Fitness
nordictrac 2500 problem: when dead man key is removed, control panel lights up, but none of the functions work. With he key in place the treadmill functions normally. Hello, You have it in DEMO mode, ...
Question about Life Fitness Exercise & Fitness
What does error 83104 mean on a Life Fitness motor control board? Motor control board flashes 83104 in sequence when power is applied to unit. Display is dead and wax/lift board appears to also not ...
the red wire to the console shows 0 dcv its supposed to show 8-12 dcv is the motor controller board dead? yes
37 questions posted
Usually answered in minutes!
31 Questions
2 Questions
1 Questions
11 Questions