Question about Lanier Office Equipment & Supplies
...service mode on a lanier ld225 Press Clear/Modes, then 107, then press AND HOLD Clear/Stop This will get you into the service mode screen. Know what you are doing before going into any modes and ...
lanier copier ld145 locked up, code is lanier copier ld145 locked up, code is sc546 Fuser warm up problem. Cause needs to be fixed and then code can be reset in service mode by a tech.
Question about Lanier Office Equipment & Supplies
What is the service mode for a Lanier 5627? Why you continue to ask the same things? Why do you continue to put new posts? If you answer when I suggested that perhaps you have your problem solved.
Question about Lanier Office Equipment & Supplies
...mode key (yellow key) 2. Use the keypad to enter "107" 3. Old down clear/stop for at least 3 secunds. (red key) 4. Enter the service mode. 5. Exit all the way and turn off. 6. Turn ON And thats ...
Question about Lanier Office Equipment & Supplies
...mode key (yellow key) 2. Use the keypad to enter "107" 3. Old down clear/stop for at least 3 secunds. (red key) 4. Enter the service mode. 5. Exit all the way and turn off. 6. Turn ON And thats ...
lanier 5518 with a sc541 code To clear enter service mode and cycle power,(push in sequence clear modes(yellow) 1 0 7 then hold the stop(red) for 5 seconds) -Carl
Question about Lanier Office Equipment & Supplies
...this code. This is a hot section problem, can be reset by entering service mode (pushing in sequence clear modes 1-0-7 hold stop button down for 5 seconds) but this is a bad code...service call? ...
Question about Lanier Office Equipment & Supplies
how to reset fuser error code on lanier ld235? fuer unit reset. not toner. i told you twice Come into test mode, if it comes back the fuser service needed. -Carl
Question about Lanier Office Equipment & Supplies
...1 hold down OK and original type key at same time to reset. -Carl you need to turn the red power switch off after you enter service mode and if there is an actual problem the code will come right ...
sc 546 lanier ld This is a fuser error code resetable by entering service mode. -Carl
487 questions posted
Usually answered in minutes!
629 Questions
267 Questions
215 Questions
218 Questions
230 Questions