Question about Sony KDL Televison & Video
power supply board it is dead 100% it is dead that board where the tv power a/c plug into it.Sometimes u get a burn or a chart coal marks if the power surge have big enough charges to the board,not it
Question about Sony KDL Televison & Video
...power supply of the tv. If possible tyr to replace the electrolytic capacitors on the power supply board . sometimes bad electrolytic capacitors can cause such problems. Visually it would be ok . but ...
has expired. The tv power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com Ebay.com to buy a refurbish power supply board for the replacement
Question about Sony KDL Televison & Video
...power supply board is the causes and the problems.That the board,that where the a/c power cord plug into it.Tries websites Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the ...
...power supply board is not dead yet , you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on ...
...power supply board is dead, you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it ...
...power supply. Board has standby power but other voltages don't come up. Tried shorting "Power On" pin (pin 13) to "STDBY3.3V (pin 15) to try and get the board to power up but nothing. If You do not ...
...Power supply works. Replaced main control unit. Both green and amber lights blink constantly How many times does the standby light blink between each pause? Its a self-test diagnostic that will ...
...power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it ...
...power supply board or mainboard.. Please take this steps on how to determine the problem: Open the back cover. Check the power supply output...It should have 5vdc for the main board..12vdc or 16vdc ...
25 questions posted
Usually answered in minutes!
79 Questions
48 Questions
59 Questions
33 Questions
31 Questions