Technics SL-DZ1200 CD Player "turntable" Questions

I have a Rowe R-89 jukebox. Even though the motor is turning on the turntable, the turntable is not moving. Should there be a washer on the turntable base to elevat it so it will turn? Hello Robert, ...

The turntable started dragging and now the record won't finish because it stops. What's wrong ? do I need a new turntable motor? Everything else seem to be working fine thxs David Is this a cd player ...

the platter, you'll see a small lip section 3) Wrap the belt around this lip 4) Put platter back on turntable 5) Rotate platter until you see the motor shaft through the holes on the platter - a brass

will not play records Your turntable may need a small power amp.Depending on the turntable you will need to buy the appropriate amp.Set it between the RCA (component) cables running from the turntable

CD Changer won't finish loading a CD When I select a CD, the turntable rotates and the pickup arm grabs the correct CD and transfers it to the turntable. The turntable drive starts to close, and ...

My player drags in turntable mode My player is dragging in turntable mode...in CD and sd player mode..please help!!!!! It must be reseted. Try unplug power for ten minutes and replug. If no result ...

no volume control I have recently purchased a turntable and tried to run it from the AUX connection on my Sound Space 8 system. My problem is that I cannot adjust the volume. Why is this happening and

turntable is wacky The turntable continued to spin around and the buttons would not work to select a cd. I turned it off and back on and it stopped spinning and the door opened. A "table error" ...

...(most likely). Hasn't been converted for 50 Hz. Dave F. Hi, Check what type of drive is driving the turntable, it will be a belt drive or an idler wheel (or jockey wheel). Clean your turntable, idler ...

I am trying to record my old vinyl records to a CD. I expected that the RCA leads from my turntable would just plug into the back of the RCD-W500C, but the manual indicates a somewhat complex cabling ...