Pioneer VSX-D608 Receiver "output speakers" Questions

...output. In this case you can use the speaker outputs of the receiver to connect the subwoofer. Using speaker wire, connect the left and right channel speaker outputs of the receiver to the left and ...

...speakers Subwoofer output issue 5.1 setup. 2 speakers connected to RF and LF speaker A terminals for music. Sub connected to sub terminal. 5 Speakers connected to Speaker B terminals for movies. No ...

...output just before the speakers disintegrate and the amplifier goes up in a cloud of smoke.  Not quite sure what you mean by speaker output, but this is tied to the power of the amplifier and ...

speakers themselves. I also swapped the speaker wires on the back receiver ( so that right was outputing to left speaker) and same problem, so have determined it is something with the receiver's audio

...output. I tried to connect some shelf speakers and all the other outputs are dead as it would seem. Im thinking it may just be cheaper to get a newer amp, though its a shame, it works quite well with ...

speakers into the "A" output and set the the receiver to play through the "A" output they do not work. You have possible either a faulty speaker selector switch for side "A", or a faulty speaker relay

...output from outputs to speakers. Electrical system and cable from cable company was struck by lightening. Yamaha HTR 5650's front panel will light up and inputs can be selected. However, inputs from ...

...output for the main speakers. Seems odd that both speakers outputs quit working at the same time. Any suggestions as what to do? I would get it assessed to see if the unit is worth repairing. There ...

...output to the speakers Hello, your unit is in "protect" mode. The protection circuit is activated to protect your speakers from a shorted output IC or output transistors. If there wasn't a protection ...