2011 Dodge Ram Pickup 1500 "wipe monitor" Questions

...monitor use it to get readings to see where your oil psi is at. P1524 OIL PRESSURE OUT OF RANGE CAMSHAFT ADVANCE/RETARD DISABLEDTheory of OperationFor the VCT to enable, the oil pressure has to be ...

EGR Monitor will not set on code reader. Light was on for EVAP problem and has been wiped out. but EGR monitor will not set. Check you hoses for cracks.

...park brake on, there is a dip stick near the fire wall on the rt side of the engine, pull it out, wipe it clean with the engine running, reinsert and pull back out. It should be in the thatched

...monitor sensor operation to determine what is causing the rich condition. had same problem w/ my 2.5L `97 wrangler. (which unknowingly I contributed to). both o2 sensors and coolant temp sensor ...

...wipe with a cloth until everything is polished metal. If the EGR looks good and is obviously working take a long look at the DPFE sensor; DPFE sensors have a reputation for failing many more times ...

...all the auto box/driving style parameters every time you disconnect the battery as doing this, wipes all the ecu memories of driver adapted

...monitor many sensor and switch inputs throughout the vehicle. In response to those inputs, the internal circuitry and programming of the CTM allow it to supply the vehicle occupants with audible and ...

...monitor and pinpoint. The crankshaft rotates in the engine block with main bearings. There may be a problem, and you can check the leak in Oil Filter. Since your leak is very minor, try snugging all ...

...in it. run synthetic oil. cheapest fix. Having run the engine out of oil, it's likely you have wiped part of the engine bearing face material off, increasing the clearance between the crank and ...

...monitor on my 2008 Yukon XL Denali has become very cloudy. Could this be an adjustment or something more? My 36,000 mile warranty has just expired. Thank you Moisture and weather is a killer? try ...