2011 Honda Ridgeline "fuel tank sending unit repair" Questions

...Never try to repair a sending unit Just make sure the float for the sending unit is free to swing when installing the fuel pump into the tank. Also empty water out of fuel pump well of the fuel ...

fuel tank. DO NOT remove the fuel tank. It is much easier to remove the eight bolts that secure the bed to the frame, lift the drivers side of the bed and place a jack stand between the frame and bed.

...Here's a new fuel sending unit. ...

...the fuel tank. To replace the sending unit you must remove the gas tank from the car and replace the fuel pump module which contains the fuel level sending unit. Repair cost is about $600.00 ...

...fuel tank and has the fuel pump mounted in it. This requires the removal of the gas tank and then the fuel sending unit can be removed from the tank. REMOVAL AND INSTALLATION Fig. 1: Fuel pump unit ...

fuel tank, then remove it from the vehicle. refer to the procedure found later in this section for details. Using the GM fuel gauge sending unit retaining cam tool No. J-24187, J-36608 (or equivalent)

Fuel tank must be removed prior to fuel pump service. 3. Using a hammer and a brass drift, carefully tap the fuel pump lock-ring counter-clockwise to release the fuel pump. 4. Remove the fuel pump and

...tank the fuel gauges are pretty much bullet proof, and the enthonal in gas now days destroys the wiring on the fuel pump and sending unit. run tank dry remove and check sending unit!!if ok then you ...

fuel tank, especially if the vehicle did not leak fuel from the fuel tank before the fuel pump was replaced, and the seal to the fuel sending unit/fuel pump assembly might have slipped out of place or