2011 Honda Ridgeline "wiper stop position" Questions

...will set the motor in the park position. Move the wipers by hand to there normal off position. Reinstall the linkage onto the wiper motor. The wipers should now park or stop in the correct

...wiper motor on 2003 chevy impala the wipers stop in up position instead of down position when stop- ped on delay position.is it something i did wrong when replac- ing the motor?does the motor need to ...

...wiper motor head, when you turn them off it supplies power until the wipers return to the resting position and it opens the contact and then they stop. I hope you find this useful and helps you solve ...

...stop in the wrong position. If this applies then inspect the wiper transmission. There could be worn/loose linkage between the wiper motor and the wiper arms. Also if the wiper motor was just ...

...wiper blades in their ''stop position'' are about 2 inches above where they should be. when i turn them on, the blades go down before moving up. how can i get the blades in the original ''stop ...

...wipers in the park position. When you turn on the wipers (or the intermittent relay is closed), the motor's internal switch is shunted such that the wiper does not stop at the park point of the

wiper arm on this 2000 Altima and it reprograms itself to stop in the up position. why? wipers return to the up position, I have positioned the wiper arm to the down position but it seems to reprogram

why does my wiper dont stop even in off position wiper dont stop but even on off position ,if i put the truck in drive or reverse the wiper stops Replace the wiper motor.

usually, several inches up from its normal stop position. Try to open the wiper motor gear section only, maybe the wiper parking contacts need a little cleaning. Check also for possible cracks on gear

...wiper might, one time, stop in the center of the windshield or it might stop all the way to the left of right. Aside from its complete failure, manufacturers build in telltales that indicate when the ...