...speaker. i replaced both capacitors and only now my tweeter is working , i tested it with another mackie amp cabinet and the woofer works fine so there is something bad in the bass amp , it was ...
bad cable connection make a fuse blow in my fender passport 250, or cuase any problemmwith ouput from my speakers...? A shorted speaker cable could cause this... however, what you do is to replace the
I have the fender passport 500 and use it as a karaoke system. Its been working fine but all the sudden now we have to turn the volume almost full blast to make the music loud to sing with. Before we ...
...bad solder joints are fairly common, especially where volume controls attach to the circuit boards. More expensive things are things like fried speaker if volume was played too loud. An ohmmeter test ...
...testing your speaker and related wiring first. Then check your headphone jack. Sometimes the jack fails and your speaker is disabled. A lot of them are soldered directly to the circuit board and ...
...to your local music store and have their tech look at it. if it doesn't go into protect, check the speaker cables by plugging them in one at a time. The bad one will send it into protect. good ...
...speaker and more commonly the input 1/4 inch connectors go bad. Sometimes caused by side loads when cables are yanked or tripped over. Be careful of running amps IF the speakers are not connected OR ...
...speaker. You may have a bad cable... and yes you can destroy the speakers with too loud a signal... HOWEVER if the system is made to work together this is USUALLY not a problem. im having the same ...
Bad speakers will read infinity, i.e. there is no continuity as the coil wire is broken. You can test by joining the lead wires of the broken speaker and connect the leads (using clips or tape) to the
5 questions posted
Usually answered in minutes!
155 Questions
25 Questions
18 Questions
