Question about Seagate BARRACUDA Computers & Internet
Installation of the drive and setting of jumpper to make it either as a master or slave During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key
Question about Seagate BARRACUDA Computers & Internet
How do to install slave drive Seagate Barracuda 7200.9. Does it has to be to the motherboard or to a card in my computer? How do I set the pins in what order? if y0our going to slave one hardrive you ...
Question about Seagate BARRACUDA Computers & Internet
Barracuda 7200.10 (how to make it slave) The map isn't on this model of hard drive. I need to slave it out but there is no mapping on the hard drive like you would normally find. Seeing as different ...
jumper position for slave operation pleasekevinmcc@austarnet for slave removed all jumpers. During the boot process you will see on the screen to press a certain key to enter setup Press and hold that
I need to put my hard drive into an enclosure but I cannot figure out if I need to switch it to a slave before adding it to another computer i have done this alot for my customers and its really ...
trying to make my seagate barracuda 7200.9 slave 1) Open your computer case 2) On the back of the drive where the connectors are, you have jumpers. These small plastic tabs change the function of your
configure hard disck to slave I WANT TO KNOW HOW PUT SEAGATE BARRACUDA 7200.10 TO SLAVE you have a diagram on the hard drive that shows you where to install a small jumper tab. Make sure you also ...
jumper settings for slave Page 21 in this manual shows the jumper should be removed to set this drive as a slave. You could also position it over the second column of pins, that is the cable select ...
SATA HDD make SLAVE How can i make may another SATA Harddisk as a SLAVE? i dont see any jumper settings in may Barracuda 7200 harddisk to change to become a slave. IDE Cable with 3 connectors (you ...
Question about Seagate BARRACUDA Computers & Internet
how to set master, slave settings in sata hdd i got 2 hdd and i want one as master and other as slave . so , plse tell is there any need to change the bios settings or any other adjustments. for this.
16 questions posted
Usually answered in minutes!
161 Questions
116 Questions
74 Questions
22 Questions
19 Questions