Chamberlain 3/4-HP Whisper Drive Plus Evercharge Standby Garage Access System "replacing battery garage door opener" Questions

battery inside the garage. I'm confused about the battery you replaced inside the garage but you can try programming the keypad just to see. Locate the smart/learn button on the back of the motor unit

...garage door openers work just fine and the indoor keypad works fine. Replaced the battery. What would cause it to not allow it to open but will close the door? Sounds like it has lost signal strength ...

garage door Make sure the battery is good. If it still wont open the door the keypad is bad. where do i find replacement springs for this model? It could be a problem with your keypad or possibly your

...garage door doesn't work with the remotes. I replaced the battery in one thinking that was the issue then the next day it didn't work again so I unplugged the battery and plugged it right back in to ...

...garage door doesnt work all the time My keypad opener works on and off, i have to dial the code about 10 times before the door openes. Is that most likely battery problem or time for new keypad?. I ...

...garage. The 9V battery died and I have replaced the battery. How do I reprogram the pad? You shouldn't need to reprogram the pad; it functions as before simply sending a signal to the opener that ...

...garage door. I replaced the battery and made sure the door lock was not on. When I try to open the door from the keypad it flashes for about 10-15 seconds but does not open the door. Any solutions? ...

...garage door is closed, but they do work to shut the garage door when it is open. help There are two possibilities here. One is the remotes batteries are weak and need to be replaced. The other is the ...

garage door opener keypad stopped working. cannot reprogram it. keyless entry keypad stopped working. Cannot reprogram it, although the light is flashing on keypad. It could just be you need to ...

garage door for several years. The keypad stopped working - replaced the battery, still didn't work. Tried to reset the master code on opener and then remote openers wouldn't work. Replaced the keypad