Question about Ovens
...gauge wire. With a 50 amp breaker, # 6 gauge wire is required. The owner's manual below mentions the wattage. (download the document, hit CTRL-F on your keyboard, type in wattage.) You might contact ...
What is the AMP requirements for the RBS275 self-clean single oven ? Hi, You will need to have a 50 amp. 240 volt line....using #6/3w/g gauge wire heatman101
...wire gauge to use depending on how long of a run you have from the circuit panel to carry the load. it is also a single phase 240 volt system, but that doesnt matter because the wires are the same. ...
Wire Gauge And Ampere Supply For An Brown Builtin Oven. Appliance Numbeer 5G81120,Type 44823,Voltage 120/240, 1 Phase, 3 wire, 60 cycle, KW 2.3 Max My Oven was bought from DOBBS Aplliance Store with a
wire for 50 Amps - AND retighten ALL connections a month or so, and then in about a Year - otherwise you WILL add wasted heat, electrical use, irradiate operation - plus risk there is the risk of FIRE
...gauge wire at the oven location, so the installing electrician can have enough to properly connect and locate the junction box or directly connect to the wall oven's built in junction box. If you ...
...gauge wires with heavy insulation, probably with a couple of spade type clips on the end that will match clips on your burner. Either that or the burner will have screw-down terminals, in which case ...
...to check wire gauge,It should be #8agw min. #6agw would be better #8agw has a max rating of 55amps.If thw wire is 20 years old or more it is rated at 50 amps thing anything else call me 831 235 ...
8 questions posted
Usually answered in minutes!
7 Questions
3 Questions
