JVC AV-48WP30 48" Rear Projection Television "inch convergence" Questions

...inch. I had sometimes seen the spot before I had the convergence problem but seem to be more predominant and the bluish line was not there before the convergence problem. I had messed with the focus ...

...inch fried something and the convergence went skeewampus and I can't align it with the remote. I smelled something burning, so I'm sure the panel fried. Is this worth fixing? Ur tv still have ...

...inch tv. I have a darker area on the left side of the screen about 3 inches wide. I replaced the bulb but the problem is still there. Any idea how to fix it. Its a projection tv. Convergence is ...

...inch mitsubishi rear projection tv red lamp stuck out of convergence, cant use fine sadjustment for convergence in tv menus to fix. when i look at the rough adjustment the red lamp is about a half ...

...inches it is on the line but the horiz. line at the left is up an inch and down an inch on the right. Same with the vert. you will need to have a shop re converge it or order a new convergence

...inch convergence I have a rca 52 inch tv with a convergence problem, I put new transitors in and turned the tv on and it is still out of whack and went into the menu to adjust the convergence and it ...

inch Maganvox tv is blurry and the letters at the bottom are blurry. Can;t hardlt make out the picture now. Replace STK convergence chips there are two next to the heat sink.Unsolder old and solder in

Convergence The screen has a ghost red image several inches to the right of the other image. When adjusting the red convergence there is a green cross in the center of the screen and the red cross is ...

...Convergence Problem - RCA 52 inch I have a 52 inch RCA, model/chassis:D52W20 ITC222. The convergence will go out for a few days/weeks and can't be fixed through the Auto Convergence or Manual ...

jvc hd56fn97 56-inch 1080p hdila rear projection tv with convergence problem, how do i fix this That set cannot have a convergence problem as it has no convergence circuit, It is a DLP set with a lamp