Question about Startrac Fitness Products Exercise & Fitness
...Check the connections on both ends of the data cable to ensure they are secure and connected properly. The data cable runs from the back of the console to the flywheel assembly. The covers over the ...
Question about Startrac Fitness Products Exercise & Fitness
...Check the connections on both ends of the data cable to ensure they are secure and connected properly. The data cable runs from the back of the console to the flywheel assembly. The covers over the ...
...Check to ensure that the cable is securely plugged into the front of the system, and that the cable doesn't appear damaged. If the cable is damaged, replace it immediately. Sponsored LinksFix ...
Question about Precor Exercise & Fitness
...will look like a cat 5 cable. Unplug it and plug it back in. That same cable runs up and plugs into the upper board. Check that connection as well. If those don't work then it may be the lower
Question about Proform Exercise & Fitness
...CHECK THE CABLE AND CONNECTION FROM BATTERIES TO THE CONSOLE.MAKE SURE ALL CONNECTION ARE TIGHT AND CABLES ARE NOT BROKEN,FRAYED,CRACKED,OR CORRODED LOOKING.ALSO MAKE SURE SAFETY ...
Question about RTO Exercise & Fitness
...check that all connections are secure, especially the console cable. Unplug and reconnect the console cable to verify.Make sure the console cable is not pinched or damaged in any way.Turn the power ...
Question about Exercise & Fitness
...check that all connections are secure, especially the console cable. Unplug and reconnect the console cable to verify.Make sure the console cable is not pinched or damaged in any way.Turn the power ...
Question about York Exercise & Fitness
...be ready to use. This should reset the sensor, and the treadmill will be ready to use. Once the cables have been checked, turn on the treadmill again. This should eradicate the problem. 1. 2. 3. ...
...is 2 months over warranty and does not power on. Any possible solutions? 1 check fuse(15 amp switch next to power cord connection) 2check connections of power cable to switch 3 check power ...
...Cable a) Check the ribbon cable and its connections. Link a spare cable from the drive board to the display board, outside the unit. Test the unit. If it works with the spare cable, replace the ...
1 questions posted
Usually answered in minutes!
1 Questions