...Connect each pair of active speakers to the Main L and R 1/4 inch jacks using TRS balanced cables. Power these speakers from the SAME receptacle or source, even if it means running an extension cord ...
...connect two passive b212 and 6 active b215 , i will use two active b215 for monitors ..... i am using a PMP 3000 Please advice,also where can i get a detailed numbered illustrations sheet for this ...
Question about Behringer Music
lights on the display indicating incoming audio but the speakers are quiet. The outputs of these mixer needs to be connected to an active speaker.An active speaker have an amplifier and a preamplifier
...connect two mackie active speakers for maximum results. There is no such thing as "MAXIMUM" results... Connect the speakers to the MAIN L and R jacks on the face using 1/4 inch TRS (balanced) ...
Question about Behringer Music
...speakers are active (ie containing amps) ***If any of your speakers are active, ask the question again, with more detail.*** So if all your speakers are passive, I offer the following. I assume there ...
...that? while hooking it up to my mixer. it started to humm. i think i smelled smoke. Incorrect connections or volume settings. • In powering up, mixer first then amp • In turning off , ...
...connect thump 15 A powered speaker to powered mixer? You failed to give us the most important information... what brand and model of the mixer? Youwill use balanced interconnect lines to a balanced ...
...connect a 400 W active subwoofer? If the subwooofer has only a single input, then connect it to the Monitor output which does a mix, HOWEVER the level will NOT vary with the main sliders, but only ...
...active speakers? The answer is NO... These jacks need to float driving speakers that are NOT grounded in any way. Connection to channel A with a grounded cable will destroy the channel A amp. Use the ...
...active speaker at the mixer output and report the results. Connect only one of the audio inputs from the power amp at the mixer output (and the passive speakers at the output) and report the results. ...
2 questions posted
Usually answered in minutes!
297 Questions
65 Questions
64 Questions
46 Questions