Goodman GMS90703BXA Heater "rusted burners" Questions

...in so i don't think it is a cracked heat exchanger may have plugged heat exchanger and or just very rusted burners pull off ventor box and make sure heat exchanger is clean remove burners and ...

...down how to go about fixing this issue. False flame I think it is. Rusted clogged burners cause this phenom Take em out out, blow em out and clean em out. Gas pooling in the burners uneven

good pilot,but no cross flame cross over tubes are probably plugged you have to pull the burners and clean cross over tubes. What ya gonna have to do is remove the burners and wire briush them. The ...

The furnace turns on but cool air is blowing through the vents When your furnace comes on have you checked to see what type of flame you have on the burners .They should have nice sharp arrow shape ...

My 2 year old (rusted and looking like a 10 year old) Pilot goes on lights the heater, burns for about 2 minutes and goes out. I tried another regulator, same problem. Gas tank is full. The pilot ...

I have a goodman gmpn 100-4 furnace that gives off a puff of flame when it lights remove burners and dump out rust and dust then put burners back in and restart gas preassure in burners blocking ...

Sleeve over burner tube??? The burner tube in our furnace is rusting out, there is already a pretty large hole in it. They no longer make these burner tubes and the warranty company is telling us they

im trying to replace the oil pump on a beckett burner i took out the 2 bolts holding the pump to the burner but the pump wont budge. the line is disconnected and it is stuck in place. 1. Disconnect ...

Burner lights. Flame pulls away from burner and sensor. Unit shuts off The first thing I would do is check burners to make sure they are clean. Often if rust particles or carbonsoot come loose from ...

My heater is 1 year old and was used only 1 week last October and will not light at all..it was used in a small cabin in Canada ..I brought it home to get fixed..someone told me they rust or corrode ...