Question about Suzuki Reno
...Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using ...
Question about Suzuki Reno
...cylinder head bolt-torque sequence. Here is the instructions, then I'll clarify. Install cylinder head bolts finger-tight. New cylinder head bolts are recommended. Tighten bolts in sequence, tighten ...
cylinder head bolts 1.5L cylinder head bolt torque step 1 18 ft lbs. step 2 60 degrees step 3 additional 60 degrees 1.6L cylinder head bolt torque step 1 26 ft lbs. step 2 90 degrees step 3 additional
Cylinder head bolt torque specs for 2000 Cadillac catera 3.0L 6 cyl YOU NEED NEW HEAD BOLTS OLD HEAD BOLTS BEEN STRETCHED. YOU HAVE TORQUE HEAD BOLTS IN FIVE PASSES. FIRST PASS TORQUE HEAD BOLTS 18 FT
cylinder head torque specs fro 2002 dawoo Hi Chris, I think (but not 100 percent sure). Cylinder head, torque to 19 nm, loosen 90 degrees. Retighten to 29 nm. Paint spot of white paint on front of ...
cylinder head bolts to 22 ft. lbs. Step 2: Tighten the cylinder head bolts to 43 ft. lbs. Step 3: Loosen the cylinder head bolts completely Step 4: Tighten the cylinder head bolts to 84 inch lbs. Step
...cylinder head bolts using the specified engine oil. Install the cylinder head bolts. Tighten the cylinder head bolts in 2 or 3 steps in the sequence shown to 76-81 Nm (56-60 lb-ft). 1.9 liter Apply a ...
...cylinder head 1.8L 4 cylinder cylinder head bolt torque bolts 1-10 ( large bolts ) step 1 21 ft lbs. step 2 44 ft lbs. step 3 loosen all bolts step 4 21 ft lbs. step 5 additional 50-55 degrees bolts ...
...cylinder head torque specs and sequence Cylinder head bolt tightening procedure: CYLINDER HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder ...
Question about Suzuki Reno
cylinder head bolt torque settings fir a 4g69 mitsubishi engine ? BOLT INSTALLATION Apply engine oil to the thread of the bolts and to the washers. Tighten the bolts to the specified torque, using the
9 questions posted
Usually answered in minutes!
90 Questions
79 Questions
65 Questions
2 Questions
5 Questions