Toshiba 50H82 50" Rear Projection Television "projector turning green screen" Questions

...projector KP 51hw40 green screen, turns off When you turn it on the screen is all green, turns itself off and the power light flashes 5 times pauses and 5 more times. Model 51hw40 Ser # 9037614 May ...

turning blue screen pot (there are 3 focus pots and 3 screen pots) and do it slowly. If you turn it too much, it will affect your grayscale Try adjusting the tint value in the projector settings.If it

...since then the screen is black when trying to turn it on and the light flashes green and red but I am unsure how many times it does this. Please could you help me? Sounds like a blown projector

...screen is blue (no visible picture at this point). After this happened, I did take the back rectangular panel off to watch the projectors during this 20 second phenomena. When the tv is first turn on ...

...projector tv (about a year and a half old 1080i), and the screen will flash green a couple times, and then about 10 seconds later, the tv just shuts off. Now, after a couple minutes, i'm able to turn ...

Green lines up okay, my red is out of whack. Is there something I am doing wrong? Can anyone help me? Did i miss a step? Frustrated......Bruce NOTE: ----DO NOT TOUCH THE CONVERGENCE BOARD " ------- 1.

...GREEN PROJECTOR IS ON BUT NOT SENDING PIC JUST GREEN LIGHT Sony PTVs do get bad CRTs, to confirm you can pull the front cover and tap on the middle CRT (green) neck with a plastic handle if the green ...

...green and red . I believe it may be the Convergence. The TV is a 52" HDTV. Objects on TV shows Double. I HAD THE SAME ISSUE. I WAS LUCKY, MY TV WAS UNDER WARRANTY. THEY SENT IT TO BE FIXED. THEY ...

...projector big screen tv the problem is the screen turns green then starts turning red then finally blacks out while audio is still on then finally turns off or goes to black...i need to know how much ...

...green preset inside of the projector or decrease the gain/bias of the red,blue if it uses connector wires check its loose contact, break check the green projectors circuit dry solder make these ...