Toshiba 65H82 65" Rear Projection Television "set times jvc tv turned" Questions

JVC TV-AV29TS4 FAIL TO COME ON. POWER LITE GETS BRIGHTER WHEN PW. SW. IS PUSHED, BUT NO PW. TURN THE SET ON...ALSO, WHEN SW. IS PUSHED AGAIN TO TRY TO TURN OFF PW. LITE STAYS LITE, YOU MUST UNPLUG SET

...JVC model HD-52G886 tv. that loses sound. The first time I lost sound I had turned off the tv & went to bed. Got up in the morning & turned on the tv & no sound. I messed with it all day ...

...times, sometimes it will correct itself, until I turn it off again. Try resoldering the vertical output IC that should correct the issue repeated off and on cycles often tend to bridge the solder ...

...set? If so, that is gig #1 input and you must use the remote to switch around the inputs to the one you have connected. Turn TV on, as soon as TV goes off the screen, count a second or two and then ...

...Jvc have a little problem with there HDMI ports of by some how you run the set with the back off or get to much light in the back the HDMI locks up. So you have to reset the set, this isn't to hard, ...

...times to get it to back to normal. Eventually, it comes back on and all is fine but it can take hours so we leave our TV on all the time. Can you advise?? Yes look for a loose connection in the ...

...stays lit, red light blinks a few times than goes uot. The set does use a lamp for a light source and average life is 2 years or 2000 hours---many lamps before they actually fail get to be

...set the convergence as best I could. Still seeing double TV has worked fine for 5 years. I turned it on yesterday and the red has shifted 2 in to the left. Cannot fix it with convergence. TV was not ...

...set to TV and VCR (both to the left). 1b) Press SLEEP TIMER and make sure it is set to "0" minutes. (Only on screen for 2-3 seconds) 2) While "0 minutes" is being displayed on the screen, press ...

...times it would remain on and could be cut off only by unplugging it from my sudge protection unit. Aaron'S sale and Lease (retailer) exchanged this set for another set (same model & make). I had ...