Toshiba 50HX70 50" Rear Projection Television "line down center sony tv" Questions

...down arrow again to move that line until it converges with the center green line and press "Return." Repeat to adjust the other lines until all three lines converge and are seen as a white cross. ...

...down for a min or so and then turn it back on,its all good for a while. Then once again the same problem will come back in few minuts. I will appreciate if anyone has faced similar problems or have ...

...center the red is pushed left and the green farther to the left. The horizontal convergence is fine. I can manually tweak it back into place but they all interac t and it's a pain and there are major ...

...down. IS there a part associated with this red flash code or is there something I can do to solve this? Same problem. I turn the TV on and it looks fine for 15-20 seconds. After 15-20 seconds the ...

...down. If this happens, turn the adjustment back to original spot and turn TV back on and take it slow. Adjust the correct color until the line just goes away. Its easiest to do this with a black ...

...line down the approximate center of the screen. The color is also not correct, mostly dark and shadowy. I am pretty sure it is hooked up alright, we recently moved and it has not worked since. It is ...

...down part of the TV cabinet (when you remove the front cover of the speakers and control panel. In case you never removed that panel, there are 2 screws with little plastic cover in the bottom of the ...

...line up One or more colors can't be adjusted when using the convergence menu. Screen is bowed or warped. TV shuts off after powering on - TV may also make a chirping noise. Here are some photos of ...

down the square being significantly smaller than the rest of the screen (toward center) Is there a base line of all the manual settings that I could check, coming from factory? Are you winging this or

...down to a single dot in the center then you are most likely at the minimum replacing all three projection tubes due to that dot. It will leave a permanent mark in the center of each CRT and not ...