my DC 14 makes a terrible noise when I am vacuuming on carpet, so I put it in the upright postion and it stops. I but down the head and the noise will stop. If I bump the head it will start making the
...protect mode off HT-TZ212 samsung dvd player The protect mode as it means is the safety cut off due to a possible error or shortin in the DVD. You must have to identify the fault before we can ...
Loud noise with belt protection system On On the DC14 there is knob to have belt protection system on or off. When in off mode there is no noise but as soon as I turn it on there is a loud noise. Also
...mode) It also sounds funny, if I do get it turned on, it usually only lasts a minute or two before shutting itself off. I don't see any clogs and the canister is not full. Any suggestions? Yup! ...
...mode" I.e. it was discharged to the point that it "sleeps" in order to protect itself. So......I simply attached a domestic DC multi adapter to the terminals on the battery that are marked + and - ...
Is it a power failure or is the TNPA5335 board faulty? I got the seven blinks of death. I tried what is advised on the service manual (disconnecting the SU and SD boards from the SC, using the jumper ...
vacuum on after changing the switch to carpet mode, does the roller brush spin? The belt controls the the roller brush and makes it spin. When the belt is broken or stretched out, and the brush is not
vacuum to become warm in use, especially if you're running your DC44 on Boost mode. The battery and motor are located below and above the handgrip, to ensure the vacuum is balanced for high-up and low
mode light went on. Can you advise of steps to take to rtrouble shoot and what might be the problem? The motor is probably burning out, or has. Smell the exhaust port. If the odor is especially strong
68 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions