...PC (with DJ software) to a Fender PAssport 500 PRO (I want stereo input)? Best way is to use a 1/8 TRS (stereo) to 1/4 TRS (stereo) cable from the PC into the Stereo 1/4 inch jacks right below the ...
...1604 vlz3 and am trying to figure out where all the parts and wires go to and how do i know if a trs is required or just mono ect... i have a compressor/effects/bbe/wireless mic/ in the rack. ...
Computer->M-Audio-FastTrackPro USB->trs outputs 1/2->linein 11-12 of mackie 1202-vlz3. How can i get stereo sound out of the mackie? Use TRS to TRS balanced cables from the M Audio to the ...
Question about Behringer Music
it must play , how to repair this unit VU light from the mixer mains output u should have two TRS jack output terminals or XLR type (round socket with 3 little holes) (sometimes they
...any assistance Look in your user manual for how you "INSERT" an EQ at an input. The 1/4 inch TRS jacks on the back, lower row labeled "Insert" is where you use a TRS cable to aan EQ that has ...
Question about Crate Music
what is proper wiring from crate cfs3 3-button footswitch to crate cx130 amp Its a TRS to TRS cable (stereo connectors)
how do I use the insert I/Os Refer to your manual, page 9, fig. 4.5. You use TRS type cables where the "ring" of the connector is the send to the effects unit and the "tip" is the signal FROM the ...
...they didnt work..so need your help to get the correct cable..thank you.. The 1/4 inch should be a TRS (balanced connector) You should find pin 1 of the XLR to the sleeve of the TRS. Pin 2 of the
...was really low. Far to low to practice with a band, let alone gig with. I only connected one mono trs cable. Should I have connected dual stereo to single trs one? also the eon manual says to ...
...cables for crate flex wave footswitch They look to be 1/4" stereo male to male jacks (known also as TRS). I don't know where you are but they are easily available. You need a pair of them at the ...
5 questions posted
Usually answered in minutes!
1 Questions
1 Questions
