Depot in a small spray can with a tube spout. DO NOT use De-Oxit in the faders. Put the tube into the slot and give a SMALL shot and work the slider. This MIGHT fix your problem. Other than that it is
increasing staticky noise when turning up the gain knob on overdrive channel If it is just while turning the control, open the unit and squirt some CRC226 into the control through the slot where the ...
...tube spout. Then work the control a bit and give it one more little squirt. Use sparingly. You can get the CRC226 at Home Depot in the electrical dept. in a small blue aerosol can for bout $2.70. use ...
Depot. Use the plastic tube by bending it so it can spray upward into the slot where the leads that solder into the board go into the metal can. Spray a little in and work the pot... then try a little
Depot in the Electrical department... about $2.70 for a can. Using the included plastic spout tube, squirt a bit into the center of the control where the knob is. Work it back and forth and then put a
...Depot in the electrical department. Sometimes you can restore controls damaged by WD40 or cleaners like Deoxit or Blue Shower. Turn it upside down and spray with the tube near the center and at the ...
Depot electrical dept. I SUSPECT that the resistance element in that pot is cracked. This is common if the knob sustained a hit. Replacing the pot is the only cure if the element is cracked. Reviewing
How do I get the electronics out of the cabinet to clean the pots .Thanks Paul DO NOT CLEAN the pots... Use CRC226 available at Home Depot nin the electrical dept in them. Use of contact cleaners ...
3 questions posted
Usually answered in minutes!
85 Questions
60 Questions
39 Questions
19 Questions
