Samsung G3 Station Desktop External Drive HX-DU010EC/BW2 2 TB Hard Drive "control device setup" Questions

...device is on.Thanks Hello, Please setup your bios as LOAD FAIL SAVE DEFAULT or you can set in manually, Follow the bellow link. BIOS SETUP BOOT CD YouTube - Acer aspire 5580 Main Unit Disassembly.flv ...

...setup bios ,please follow the link, It may be the operating system has not recognized all the ports, if you operating system is now ok, go to my computer>properties>hardware>device manager, ...

...Control Panel -> Hardware and Sound -> Device Manager -> Scroll to find: -> HDD -> Open -> Properties "Update the Driver / Software." Go to this "Website." Fill-in all information ...

...control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back ...

device include: IDE0 means Pri master IDE1 means Pri slave IDE2 means Sec master IDE3 means Sec slave or if you are using a USB insert your usb drive click start right click on my computer select open

...control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the ...

...control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list  make sure you have the right one ...

device include: IDE0 means Pri master IDE1 means Pri slave IDE2 means Sec master IDE3 means Sec slave or if you are using a USB insert your usb drive click start right click on my computer select open

...reboots, freezes up entirely, or blue screens? I've seen similar issues when the USB 2.0 host controller isn't enabled in the System (BIOS) setup. Many devices, such as USB mice and MP3 players ...

device manager, and look to bottom of the list to USB Controllers. right click on them, and Uninstall all controllers and restart pc and see if all the ports are recognized and installed automatically