Meade ETX90AT Maksutov Telescope with UHTC (cat35140321) "motors" Questions

Elevation motor stopped working.... My lx90 scope was working fine until the other night and the elevation motor stopped...the hand box indicated that the motor was not working. I reset the system, ...

...other suggestions . Continual motor faults simple mean something is broken inside the telescope--- motors, or gears--- something is preventing the motor from turning the telescope. Time to either ...

C10-NGT RA+DEC clamps and the motors Hey, I have a question for you guys. I have a feeling it's going to be obvious. When using the motors in the C10-NGT reflector telescope model, do the RA and DEC ...

... the liberal use of grease and the quality of machining of the main DEC and RA gears. 1. Remove the motors from the telescope. Be careful when removing either motor as there is a compression spring ...

...on first use everything was fine and then when i tried to use it again fault code appeared testing motors. Now when i switch on autostar it allows me to enter all the required info starts alighn

Vixen Telescope DD-1 Dual Motor Controller for RA and Declination The DD-1 controller does not drive the declination motor at the same speed as the right ascension motor. The 1.5X, 2x, and 32 X speeds

...on Ebay. Usually Meade wants you to send in the scope for repair and will not sell you any gears or motors. ...

cg5 gt dec motor broken Can you hear the motor running even though the axis does not move? If it is, then all that is possibly needed is to realign the motor on its mounting with the driven gear of ...

...etx-60at motor fault at startup Could be several things: You did Train the drives and CALIBRATED motors using the same power source you will use outside? Do not run off of the internal batteries ...

...working only. After initializing and fining north the auto star says stalled motor. Do a calibrate motors and make sure you are using a separate 12 volt power pack or BRAND NEW internal batteries. ...