Panasonic TH-42PD50U 42 in. Plasma EDTV "power light" Questions

...light. Is it the power supply board? or something different? Check the capacitors and replace the power components. It is an easy fix if handy with soldering electronics. Tv Repairman may charge ...

...power light blinks 7 times. I hold down the power button until it stops blinking. When I let go of the button, the red power light stays on, the TV turns on for about a second and then it turns off ...

power light indication LED light,just flashes?Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.Might solved ur problem,by replacing the power supply

Power light blinking 2 times Panasonic Plasma TV Model# TH-42PD50U. the TV made a popping noise and after disconnecting the Power cord, the Red Light above the power Button is Blinking 2 times. TV ...

...power light is flashing. in protective mode the tv does not turn on and light is blinking, typically we must proceed by elimination as some faulty sections are preventing the tv to switch on. unplug ...

...light hi, no power has to do with your tv,s power supply, the trouble may be as small as a fuse or it may be the power supply needs replacing, this is your best bet, I would check that part first, if ...

power light/have already replace power supply UNIT WENT DEAD WHILE WATCHING. HAVE NO POWER OR POWER LIGHT. HAVE REPLACED POWER SUPPLY WITH NO CHANGE. If your power supply is new try to check the power

power light is blinking and tv will not atay on power light is blinking and tv will not stay on when i press power button on set the tv will come on for a split second and then turn off and red light ...

...green power light stays on but the tv does not turn on Same problem here. We woke up this morning to the tv not powering up. It just clicks over and over again without turning on. check power ...

...Power light blinks ten times in one second intervals and then pauses for about five seconds. Most problems with TV not turning ON is a power supply related problem. The relay click are a normal ...