Cobra 29 LTD CB Radio "radios connect" Questions

Ad

Question about Cobra Radio Communications

1 Answer

...connect the three power wires? (radios with 3 power leads) Answer: Connect the black wire to chassis ground. Connect the red wire to a switched +12 volt source, such as the fuse for the AM/FM radio. ...

Ad

Question about Radio Shack Radio Communications

2 Answers

TRC520 CB wont power up i can connect all the power wire to the fuse and ground out the ground wire. but it still will not turn on. Hello, First of all you only have the Power wire Red, and the ground

Ad

Question about Cobra Radio Communications

1 Answer

how do i connect a amplifer to my cb radio Usually a linear amp will go between the radio and the antenna. Make sure all connections are tight. Tom

Question about Galaxy Radios Radio Communications

1 Answer

can i connect my galaxy radio directly to the car battery? Yes it can be connected direct to a car battery.

Question about Galaxy Radios Radio Communications

1 Answer

Hello Model radio Galaxy DX959 Purchase date July 2008 My issue is in SSB mode only everything ells is working fine. The damage occurred wail following the transmitter alignment instructions from the ...

Question about Cobra Radio Communications

1 Answer

...via the 12 volt connection the fault is in the built in power supply the radio has.All "Base" radios have 12 volt connection and their own internal power supply to operate off wall

Question about Galaxy Radios Radio Communications

1 Answer

ssb has a dk carrier when mic is keyed? You have a cold solder connection or dirty contacts in the relay.. key the radio and tap the radio... if the carrier goes away its a solder connection.

Question about Radio Communications

1 Answer

HAVE COBER 200GTL NO COME ON this is a very nice radio (it was one of my first) , it works on cb and 10 meter ranges and has many high end features for a radio as this if it wont light up , ck the ...

Question about Galaxy Radios Radio Communications

2 Answers

overheating when keying mike to talk overheating when modulating This is almost ALWAYS caused by a poor antenna connection forcing the radio to dissipate the heat generated when transmitting. Look for

cobra gtl 148 seems to have no power til i push on mic connecter. changed mic , opened up and it looks great.tightened up female connecters that the mic plugs into at mic connection.still radio ...

Not finding what you are looking for?
Cobra 29 LTD CB Radio Logo

999 questions posted

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...