Behringer Eurorack Ub802 - Ultra Low-Noise Design 8-Input 2-Bus Mixer "39 audio output mixer" Questions

...output jacks are PSUEDO balanced so use TRS cables and you should be able to drive two amps from each with no problem either as a WYE or daisy chained connection. The PSUEDO balanced connections do ...

...39;m using Numark DM1295 mixer You would NOT connect an audio signal to the "send" jacks... those are OUTPUTS... In doing so you are driving signal backward enough to get to the headphones. Sends and ...

...39;s audio jack t Behringer mixer Eurorack UB802 is losing partial stereo signal in one channel. When I record (audacity software) I can hear both channels but displays one channel. Is it my ...

...audio mixer sound craft epm-8 is not working , some part like R1 burned.kindly tell me the value of R1, and the correct output voltageof cn-2 If the part burned, it did it for a reason. Likely ...

39;m looking at the FMR Audio Really Nice Compressor - RNC 1773 or some possible others. I just need to know how to hook it up and what cables I will need. Thanks! The compressor is a really good idea

...39;t being picked up by the person on Skype at all. Skype allows only one audio input at the time. You can set up the input device in the skype menu. Try connecting all microphones to the Mackie and ...

...mixer. Yes, this means running extension cords, but unless you can tolerate noise due to ground bounce and damage to your equipment respect this requirement... it isn't in the manuals but is well ...

...forget about two of the speakers... keep them as spares and run low volume to avoid blowing the speakers. I can't imagine any competent audio equipment supplier configuring your system this

...39;t tell us what the "speakers" are you are mentioning... I ASSUME that these are NOT just computer speakers. From the main outputs you should have BALANCED cables (TRS or XLR) cables tying to your ...

...39;t seem to get the reverb to work you have to set three gain controls to pass the FX into the mix. The FX send gain for each input channel, the FX fader which sends the FX mix to the effects unit, ...