Question about Kymco Grand Dink 250 Motorcycles
...Remove the Speedometer Connector from the back of the speedometer. Depress the external latches and use a rocking motion to separate the pin and socket halves. 7. Gently pry the three latches upward ...
...remove the speedometer housing, by first removing the seat, then remove the one small screw near the seat that holds the speedometer housing in place, also remove the small screw at the front of the ...
Replace bulb on speedometer How to change lightbulb on speedometer Remove the speedometer, remove the housing. The bulbs are in deep recesses accessable from the back.
...Not Working I was hoping someone could help me with my speedometer. I have a 99' 748 and I recently removed the front tire for maintenance. The bottom part of the speedometer that the axle goes into ...
Question about Kymco Grand Dink 250 Motorcycles
...remove the old speedometer on my 97 dyna super glide and replace it with a new speedometer. Need instructions. The speedometer is mounted in a black casing with 5, very small lights display. I am not ...
...Not Working I was hoping someone could help me with my speedometer. I have a 99' 748 and I recently removed the front tire for maintenance. The bottom part of the speedometer that the axle goes into ...
Question about Kymco Grand Dink 250 Motorcycles
Remove the cable from the speedometer unit and check that it is freely rotating. Oil it and put back. Next, we need to check for the gear near the axle of your front wheel. Screw the speedometer cable
Question about Kymco Grand Dink 250 Motorcycles
Remove the cable at the speedometer drive unit on the front wheel. Inside where the cable connects there is a flat pin in the center that should turn when the front wheel is spun. If the drive unit is
3 questions posted
Usually answered in minutes!
32 Questions
31 Questions
21 Questions
21 Questions
22 Questions