Zebra Z4M Printer "lcd display" Questions

...however the LCD display shows 1 of 1. Is there a setting to change the display to only give the total number sent as one print job? its the way your software works, is nothing with the

...lcd display to the logic board. I work with these Printers all day long. This generally means that the mother board is bad. If this is fresh out of the box then I would get an RMA from Zebra and they ...

Z4m+ printer display goes out after just being replaced for same problem. printer works but can't see info in lcd faulty Logic Board, need to be replace.

...DISPLAY BEGAN FADING AND THEN DISAPPEARED. PRINTER IS WORKING, BUT NOTHING ON THE PANEL TO INDICATE WHERE AND WHAT. I would say that the panel has failed. It's an LCD and they can go bad. I would ...

LCD display, what could cause this problem and where is this sensor located the sensor(printhead and media sensor) from the print head is the metalic plate next to the black plastic(gap sensor) sensor

...Thermal printer (no Thermal Transfer option installed), only media sensors are adjusted, and the LCD displays for ribbon do not appear in this procedure. Important ? This procedure must be

...lcd display flashes printing 165876 of 178989 - these numbers change randomly and the printer just freezes. Any help gratefully recived Thanks Try a reset: press the PAUSE and FEED keys while turning ...

...LCD Display, with pleanty of ribbon and label paper withen the unit. If you Then hit the pause button to un pause, the job continues (somtimes pausing again depending on how much more it has to go). ...

LCD display My printer is working, but the LCD is blank, is there anything I can do to restore this? Lisa Here is what Canon says. Solutions for blank LCD Issue: The Liquid Crystal Display (LCD) is ...

...LCD Display when i tur it on the display shows the booting message but once it boots it stop displaying anything in the LCD panne, maybe is some configuration issue? Try pressing and holding the menu ...