Linksys Wireless-G Broadband Router "install 2 ghz" Questions

...store plug it into port 2 then into comp 1 plug another one into port 3 on your router and plug it into other comp. everything should work xp will pick up and install anything needed. have fun ...

...install the dlink on the imac. All you need to do is connect the modem first the dlink. (Modem connected to Internet or WAN port of the dlink). Now if they are connected, your imac should be plugged ...

...2.4 ghz and one at 5.8 ghz (ii) a Samsung laser printer with a Linksys wireless print server, and (iii) a HP all in one printer. I installed the updated drivers from Buffalo. I wonder if it could be ...

...2.4 Ghz). Path #2: If the netgear is in the same room as you, couldn't you plug in directly an ethernet cable into the netgear? You could buy an ethernet cable at any computer stores around and they ...

...2.4 GHz router.We had to turn off the power in the house. When it came back up the router now has a orange light that says Cisco systems. We have the internet on our main computer but the router is ...

...Can you give any suggestsing to resolve this problem. thanks May be the wifi modem drivier is not installed properly. check it using device ...

...the name [SSID]. Connect the computer to the router. Open the setup page. Default password is admin. Change the channel to 11-2.462 GHz. If you want to enable wireless security, go for WEP 64

...2 years old. Hi there, you don't need to install from the disk. Make sure your modem connects to your router and then the computer's LAN port is connected to the LAN port of the router. Open internet ...

...install an additional antenna. • The wireless router or access point is turned off or isn't working properly. There are two things to try: o Make sure the router or access point is turned on and that ...