Toshiba 62MX196 62 in HDTV DLP TV "sugest" Questions

After installing the two converegence chips,(stk-392-110)the tv powers on for maybe two seconds then shuts off. I took the board back out and checked all solder joints,they were all ok.when powered on

61 in dlp InFocus the tv turns on some times but then will turn off and will not turn back on for a long while?? any sugestions Check powersupply board for loose connection.

Turning closed caption on Sony kp61hs10 Can't turn closed caption off on Sony kp61hs10 any sugestions Your power source seems to be the problem, you will need to replace that part.

My Toshiba DLP 62MX196 is not powering up and 3 yellow light keeps flashing continuous. Any sugestions ? Tks. yellow light 3 blinking repeted continuous, Have you tried a new lamp? part# 75007111 ...

...CONTROL FOR THIS MODEL SO THAT I CAN ADJUST THE DIGITAL ARRAY USING THE CURSOR BUTTONS, OR DO YOU SUGEST ANOTHER WAY. The best source I have found for original remotes: Remotes Expect to pay for it ...

flyback board for RCAd52w20 replaced cap replaced transistor now nothing used to have green light blink now nothing looking for flyback board any sugestions have lots of power to board stumped a bad ...

convergence on my rca 48" projection tv is way off. picture is also distorted a bit. any sugestions? the convergence ICs need to be replaced. I can post a link where you can purchase new ones and

NO IMAGE IN MY TV.. I have a RCA TV D52W20 when turning on I can hear every thing like normal, but I'm not be able to see any thing, (no image showing) any sugestion? Thank's CHECK ALL INPUTS AND ...

I have a Mitsubishi WD-52525 and it started making a very loud noise that seems to be coming from the rear fan. I replaced it and it is still making the noise. Any sugestions? it sounds like your ...

My sony rear projection tv's red light started blinking 8 times, so I removed the high vltage splitter, so I needed to test the block. And you guys are sugesting for me to turn on the tv, now do I