Question about Kenmore Washing Machines
...washer and the lint filter in under the machine. I had to tip the thing over to get at it. There should be a 3 inch by 8 inch cover on the right rear of the top of the dryer. Open the lid, grab the ...
Question about Kenmore Washing Machines
...washer model # 25864400 is turned on it fills with water but won't start washing why ? model 25864400 Hello, It looks like the model no. you give in incomplete. If it has a small "110." in front of ...
...washer? The model number on Kenmore top loaders is usually printed on a nameplate along the wash tub rim opening under the washer lid. The model number has 8 digits with a prefix of "110". If you ...
...model number on your washer or dryer (located on a nameplate around the door opening) should have a prefix code of "110". This number identifies the manufacturer as Whirlpool. If you need further ...
washer leaks water in the tub when turned off. Hi, You will need to change the inlet mixer valve. It is sticking open just enough to allow water to drip through it. This should be chandes asap so that
open and close the lid to get the drum to spin I don't get cold water in the washer. I even changed my water inlet valve. I don't know what else I have to look for. Please post me the solution
...is helpful to you. NOTE: "110" is not the model number. This is the prefix on the model number that identifies the manufacturer of your washer. 110 indicates the washer was manufactured by
...typically located on the upper front, as you open the door. Is your washer leaking through the back, from the side, underneath? With this information I can better address the issue at hand. Thank
Question about Kenmore Washing Machines
...washer model 110 91521210. This is a cold rinse only model. The cold water wont go into the washer. I have checked water lines and hoses. HELP most likely machine tap not opening........easy to ...
Question about Kenmore Washing Machines
i have a kenmore top load washer series 300 model 110 20102311 when i open top lid should there be some tension when try move tub in any direction This type of movement is normal for this washer
42 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions