...pressure washer Low pressure Ran water through hose to clear air from line. All seems to work well except pressure is low from the pressure washer itself. could be unloader valve or leaking valves or ...
...pressure drops below 20 PSI the washer can have the following problems; Slow Fill- low water pressure reduces the speed at which water flows into the machine. Verify the pressure at all other water ...
...pressure drops below 20 PSI the washer can have the following problems; * Slow Fill- low water pressure reduces the speed at which water flows into the machine. o Verify the pressure at all other ...
...Pressure Switch If the washer is overflowing the pressure switch might be defective. The pressure switch is attached to a small tube which is attached to the outer wash tub. As the water level rises ...
...washer. I have cleaned out the inlet of Lime. If you have checked the valve filter and it is clean then a couple of possibilities, the valve itself could be not opening properly due to a sticking ...
Question about Samsung Washing Machines
...washer displays nf several times in the middle of the cycle, supposedly low or no water pressure. When starting you hear great pressure but mid way through in rinse and refill times it's low Obvious ...
...Washer stopped and flashed LF and now won't start. Any ideas what is wrong? Hi Error code LF means long fill. This means that analog water level pressure sensor signal is out of range or the water ...
Question about Washing Machines
...low pressure and cold. is there a washing machine available that can use low pressure? our well is gravity feed and has not much head so we have low pressure. Is there a machine made that will run ...
washer, started another load and started getting this code. Any comments on what this could be? MO The fh is a fill error caused by one supply being low on pressure, a bad fill valve, a bad flow meter
...pressure to the washer and trigger the error. Replace the hoses if needed. If you have a High Efficiency washer, make sure to use HE detergent. Excess suds could cause the incoming water flow to be ...
42 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions